200W Laser Rust Removal Machine For Cleaning Paint
coating/resin/weld residue/Oxide/Restoration
Description:
QA-LC200 adopts a 200W Fiber laser source and hand held laser gun
with water cooling.
Laser cleaning equipment is a new generation of industrial surface
cleaning laser system.
Laser rust removal uses not chemical agents or mechanical
polishing, so it is faster and safer. It has advantages of higher
efficiency, high automation and no subsequent processing work,
lower labor intensity and lower cost.
There is oxidation and corrosion when metals meet oxygen and water
vapor in air. It will greatly damage the metal workpiece and the
rust will spread from outside to inside and become worse and worse
as time goes on, until the whole workpiece is totally corrupted. So
rust removal is extremely important.
5 Stars Reviews from Customers:
Comparison with Traditional Clean Methods:
| Comparison | Laser Cleaning | Chemical Cleaning | Mechanical Grinding | Dry ice cleaning |
| Washing Method | non-contact cleaning | contact cleaning | Abrasive contact cleaning | non-contact cleaning |
| Harm to base material | None | Yes | Yes | None |
| Washing Efficiency | High | Low | Low | Mid. |
| Consumable | Power | Chemical Detergent | Abrasive paper, grinder, abrasive stone | Dry Ice |
| Washing result | Very good, very clear | Medium, uneven | Medium, uneven | Good, uneven |
| Precision Washing | Accuracy controllable. High precision | Uncontrollable, low precision. | Uncontrollable, medium precision. | Uncontrollable, poor precision. |
| Safety/Environment | No pollution | Chemical pollution | Dust pollution | No pollution |
| Operation | Easy to operate, portable or automation optional. | Complicated process, higher technical requirement of the operator.
Pollution prevention measures required. | Need more time & manpower. Pollution prevention measures required. | Easy to operate, portable or automatic. |
| Investment | High investment on machine. But no consumable, low maintenance cost | Low investment on machine. But expensive consumables | Medium investment on machine. High man-power cost. | Medium investment on machine. High consumable cost. |
Product features:
1 Laser cleaning is universally acknowledged as the most reliable
and effective solution for all materials
with features of non-contact, no grind and no heat effect.
2 High efficient clean speed of4m'-40m /h Accurate cleaning for
exact position and precise size
Widely applied in flat, curved and three-dimensional surface for
work piece of elastic material and plastic with very small and deep
holes.
3 Flexible operation for work pieces with complicated geometric
construction can be realized by mechanized or hand held laser gun
4 No maintenance and no consumables Dust-free, no chemicals, no
pollution
Non-contact cleaning and no damage for substrate
5 Extremely low cleaning cost and High cleaning efficiency
Specifications:
Introduction Laser Cleaning Machine
Detailed.pdf
QA-LC100
Laser Cleaning Machine for rust removal.p...
Model | QA-LC50 | QA-LC100 | QA-LC200 | QA-LC500 |
Laser source | Fiber | Fiber | Fiber | Fiber |
Laser Power | 50W | 100W | 200W | 500W |
Fiber cable L | 3 M | 5 M | 5 M | 15M |
Pulse Energy | 1 mJ | 1.5 mJ | 3 mJ | 100 mJ |
Wavelength | 1060nm | 1060nm | 1060nm | 1060nm |
Frequency | 50-500KHz | 1-2000KHz | 1-2000KHz | 10-50KHz |
Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤60 M²/Hour |
Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s |
Cooling | Air cooling | Air cooling | Water cooling | Water cooling |
Dimension | 450*350*500 | 500*400*550 | 800*450*1000 | 900*800*1300 |
Weight | 30Kg | 40Kg | 90Kg | 220Kg |
Beam width | 10-110mm | 10-110mm | 10-170mm | 10-170mm |
Optional | Manual | Manual | Manual | Manual |
Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ |
Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ |
Application scope:
Space flight and aviation/ships, automobile/machine manufacturing,
mould/hardware tool, food processing/chemical industry, rubber and
plastic/tyre, electronics/electrical equipment, weaponry, building
materials/cultural relic, steel structural parts, rail
transit/machine tool, etc.
Removal for rust, oil stain, grease, dirt, resin, mold release, oil
paint, coating, weld residue, oxide, production residue etc.
Rust removal: High energy pulsed laser focusing on the surface of object to
simulate plasma, continuous irradiation of high-energy plasma
instantaneous formation and expansion, resulting in a series of
tiny explosions, formating plasma blasting, finally achieve the
relativel smooth corrosive layer of boject surface to physical
blasting burst, and move through the high speed laser spot to form
a plume that will clean the debris to complete the cleaning. Mainly
used in metal rust. | |
FAQ:
1 Q: What is the warranty of the laser rust removal machine?
A: 2 years` warranty and whole life after-sale service.
2 Q: What is your payment terms?
A: T/T, L/C, Westen Union, etc.
3 Q: What is your after-sale service?
A: Engineers can offer oversea services and we can also offer
online service for little problems,
using online chatting tools like Whatsapp to talk with customers
directly for all questions .
4 Q: How is the quality of the machines?
A: Germany high technoloy with good quality.
5 Q: How is the operation of the machine?
A: We can also send engineers to your factory for training. Or you
can send worker to gain training in our factory directly.
We offer operation manual and videos, show you how to operate the
machine
