Rust remover machine laser 100W portable gun cleaning Painting Rust
Oil
Description:
QA-LC100 Rust remover machine laser has equipped with a special
100W fiber laser device, which is specially design for cleaning
thechnology.
The cooling system is water cooling, we also add a dust connector,
in order to work in a clean envirenment.The laser cleaning head is
a hand held one, like a gun, these is a trigger on the gun, to
start and stop the cleaning freely.
The fiber calbe length for 100W can be max 6 meters, we also can
change and make it longer, up to 100 meters for 1000W.The laser
derusting machine can be customized according to customer special
demands.
For the machine outlook, we have sealed bench top, hand held type,
moving case type and backpact type to choose. For laser power, we
also have 30W,50W,70W,100W 200W 500W to choose from.
Laser absorption rate for metal
Based on the metal surface cleaning customized laser, according to
the laser absorption rate of different wavelength of materias, the
prior art selection of 1064 nm solid-state lasers or fiber lasers,
metal absorption rate of up to 30%, with special mode spot, both
can effectively clean rusty, and also protect Base metal with no
damage. Considering the stability of laser, the use of cost and integration
methods and other factors, the latest technology using wavelength
of 1064nm fiber laser is better than solid lasers, Maxphotoncis
100W pulse laser cleaning source, is the best configuration for
hand-held laser cleaning. |  |
Characteristic:
1. Laser cleaning has no contact
2. Rapid, clean and accurate cleaning
3. No damage to substrate
4. High cleaning precision,
Comparison with Traditional Clean Methods:
| Comparison | Laser Cleaning | Chemical Cleaning | Mechanical Grinding | Dry ice cleaning |
| Washing Method | non-contact cleaning | contact cleaning | Abrasive contact cleaning | non-contact cleaning |
| Harm to base material | None | Yes | Yes | None |
| Washing Efficiency | High | Low | Low | Mid. |
| Consumable | Power | Chemical Detergent | Abrasive paper, grinder, abrasive stone | Dry Ice |
| Washing result | Very good, very clear | Medium, uneven | Medium, uneven | Good, uneven |
| Precision Washing | Accuracy controllable. High precision | Uncontrollable, low precision. | Uncontrollable, medium precision. | Uncontrollable, poor precision. |
| Safety/Environment | No pollution | Chemical pollution | Dust pollution | No pollution |
| Operation | Easy to operate, portable or automation optional. | Complicated process, higher technical requirement of the operator.
Pollution prevention measures required. | Need more time & manpower. Pollution prevention measures required. | Easy to operate, portable or automatic. |
| Investment | High investment on machine. But no consumable, low maintenance cost | Low investment on machine. But expensive consumables | Medium investment on machine. High man-power cost. | Medium investment on machine. High consumable cost. |
Specifications:
Laser Cleaning
Machine Detailed Introduction.pdf
| Model | QA-LC50 | QA-LC70 | QA-LC100 | QA-LC200 | QA-LC1000 |
| Laser source | Fiber | Fiber | Fiber | Fiber | Fiber |
| Laser Power | 50W | 70W | 100W | 200W | 1000W |
| Laser Wavelength | 1060nm | 1060nm | 1060nm | 1060nm | 1064nm |
| Pulse frequency | 20-100KHz | 20-100KHz | 20-100KHz | 20-100KHz | 20-500kHZ |
| Cooling | Air | Air | Air | Water chiller | Water chiller |
| Dimension | 760*780*790mm | 1100*950*700mm | 1500x1200x1800mm |
| Weight | 56Kg | 60Kg | 40Kg | 178Kg | 400kgs |
| Scanner width | 10-60mm | 10-60mm | 10-60mm | 10-60mm | 10-150mm |
| Optional | Manual/Automation/Customers | |
| Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40℃ |
Application scope:
All industries, all the old and durty items which need to be
cleaned and re-painting.
Components combination, welding surface pretreatment, metal surface
stripping (all surface paint or designated parts off paint) and a
variety of industrial products or molds cleaning
Rust removal:
High energy pulsed laser focusing on the surface of object to
simulate plasma, continuous irradiation of high-energy plasma
instantaneous formation and expansion, resulting in a series of
tiny explosions, formating plasma blasting, finally achieve the
relativel smooth corrosive layer of boject surface to physical
blasting burst, and move through the high speed laser spot to form
a plume that will clean the debris to complete the cleaning. Mainly
used in metal rust. | |
Machine details:
FAQ
1 Q: What is the warranty of the cleaning machine?
A: The warranty is 2 years, whole life after-sale service. Online
service is OK.
2 Q: What is your payment term?
A: T/T, L/C, Westen Union, etc. Any payment term.
3 Q: How is your after-sale service?
A: Engineers can offer oversea services and we can also offer
online service, using online chatting tools like Whatsapp to talk
with customers directly. Efficient and convenient.
4 Q: How is the quality of the machine?
A: Best quality. Price is reasonable.
5 Q: How is the operation of the machine?
A: We offer operation manual and videos, show you how to operate
the machine.
We can also send engineers to your factory for training.
