1000w/500w/200w/100w Fiber Laser Rust Removal/laser cleaning
Machine , Lifetime 100000 Hours
Description:
Laser cleaning equipment is a new generation of industrial surface
cleaning laser system. It adopts the advanced laser source, laser
optical scanners and control system to meet the requirements of
metal surface cleaning process. It can be customized according to
customer requirements to develop a dedicated cleaning system.
Widely used for the surface laser degreasing, laser paint removal,
laser removal of zinc, laser film removal, laser cleaning, such as
coating, etc
There are 4 wheels on the bottom, so the machine can move freely on
floor, the weight is only 35kgs, you can also take up by hand
easily. Very convenient for transport.
This equipment can also remove oil coating, painting coating, oxide
coating and glue of old items which need to renew.
Product features:
1. Laser cleaning has no grinding, non-contact, no thermal effect
and suitable for various materials, etc.
2. Rapid, clean and accurate cleaning, removal of surface coatings,
coatings, oxide;
3. No damage to substrate;
4. High cleaning precision, strong controllability
5. Can be used for a long time, low operating costs;
6. The device can realize automatic operation and simple operation;
7. Environmentally friendly, no supplies, no two pollution
Comparison with Traditional Cleaning Methods:
| Comparisons | Laser Cleaning | Chemical Cleaning | Mechanical Grinding | Dry ice cleaning |
| Washing Methods | non-contact cleaning | contact cleaning | Abrasive contact cleaning | non-contact cleaning |
| Harm to base materials | None | Yes | Yes | None |
| Washing Efficiency | High | Low | Low | Mid. |
| Consumable | Power | Chemical Detergent | Abrasive paper, grinder, abrasive stone | Dry Ice |
| Washing results | Very good, very clear | Medium, uneven | Medium, uneven | Good, uneven |
| Precision Washing | Accuracy controllable. High precision | Uncontrollable, low precision. | Uncontrollable, medium precision. | Uncontrollable, poor precision. |
| Safety/Environment | No pollution | Chemical pollution | Dust pollution | No pollution |
| Operations | Easy to operate, portable or automation optional. | Complicated process, higher technical requirement of the operator.
Pollution prevention measures required. | Need more time & manpower. Pollution prevention measures required. | Easy to operate, portable or automatic. |
| Investments | High investment on machine. But no consumable, low maintenance cost | Low investment on machine. But expensive consumables | Medium investment on machine. High man-power cost. | Medium investment on machine. High consumable cost. |
Specifications:
QA-LC100
Laser Cleaning Machine for rust removal.p...
Introduction of Laser Cleaning
Technology A.pdf
Model | QA-LC60 | QA-LC100 | QA-LC200 | QA-LC500 |
Laser source | Fiber | Fiber | Fiber | Fiber |
Laser Power | 60W | 100W | 200W | 500W |
Fiber cable L | 3 M | 3 M | 5 M | 20M |
Pulse Energy | 1.5 mJ | 1.5 mJ | 2 mJ | 50 mJ |
Wavelength | 1060nm | 1060nm | 1060nm | 1060nm |
Frequency | 1-2000KHz | 1-2000KHz | 1-2000KHz | 10-50KHz |
Clean speed | ≤5 M²/Hour | ≤10 M²/Hour | ≤15 M²/Hour | ≤50 M²/Hour |
Scann speed | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s | 0-7000mm/s |
Cooling | Air cooling | Air cooling | Air cooling | Water cooling |
Dimension | 650*250*560 | 900*450*980 | 900*450*980 | 1100*600*1100 |
Weight | 30Kg | 40Kg | 90Kg | 230Kg |
Beam width | 10-100mm | 10-100mm | 10-100mm | 10-100mm |
Optional | Manual | Manual | Manual | Manual |
Temperature | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ | 5-40 ℃ |
Voltage | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ | Single Phase 220V, 50HZ |
Contaminant
The bonding force between the contaminant and the surface is mainly
covalent bond, double dipole, capillary action, hydrogen bond,
adsorption force and electrostatic force. Among them, capillary
force, adsorption force and electrostatic force (Figure 1) are the
most difficult to destroy.
Note: capillary force from a thin liquid layer (such as atmospheric
humidity) in the particle and the surface of the primary layer and
the small gap between the cohesion; adsorption force is the main
adhesion of micron pollutants
Application scope:
Metal workpiece laser derusting, degreasing, laser paint removal,
laser removal of zinc and film, laser coating removal,
Industry: aerospace, mold, microelectronics, construction, nuclear
power plants, automobile manufacturing, medical, military etc
FAQ:
1 Q: What is the warranty of the laser cleaning machine?
A: 2 years` warranty and whole life after-sale service.
2 Q: What is your payment term?
A: T/T, L/C, Westen Union, etc.
3 Q: What is your after-sale service?
A: Engineers can offer oversea services and we can also offer
online service for little problems, using online chatting tools
like Whatsapp to talk with customers directly for all questions .
4 Q: How is the quality of the machine?
A: Germany high technoloy with good quality.
5 Q: How is the operation of the machine?
A: We can also send engineers to your factory for training. Or you
can send worker to gain training in our factory directly.
We offer operation manual and videos, show you how to operate the
machine.
